<p>Castaly offers a variety of Finish, Orbital Sanders with various options and features available. Review each product specifications to find the best sander to meet all your requirements.</p>
<h3>Features:</h3>
<ul>
<li>This model is especially suited for irregular surface sanding (other designs are available).</li>
<li>Designed for solving irregular or profile surface sanding problems easily and quickly such as sculptured panels, bas-relief or beehive, various profiles of panel inserts, window and raised panel door frames, sculptured doors.</li>
<li>Also, it does a very good job for fine finish, lacquered sanding such as solid wood, veneer, lacquered panel sanding, and burr cleaning.</li>
<li>Two brush heads running 0 degrees and two brush heads running 15 degrees to limit the sanding mark.</li>
<li>All four brush sanding heads are oscillating by variable speed adjustment.</li>
<li>All four brush sanding heads are turning by variable speed control to achieve best sanding result for the different purposes.</li>
<li>The panel pressure device is specially designed to handle small pieces of stock. It requires no vacuum, saving space and cost.</li>
<li>The new machine structure consists of two reversible crosswise brushes, combined with forward running brush permitting cross and longitudinal sanding to be performed simultaneously.</li>
<li>With wide belt sander at the end to do fine finish sanding for the top flat surface.</li>
<li>Any type of irregular surface can be sanded easily and quickly.</li>
<li>The brush can be conveniently and quickly replaced.</li>
</ul>
<p> </p>
<table style="width: 384px;">
<tbody>
<tr>
<td>
<p><strong>SPECIFICATIONS:</strong></p>
</td>
<td style="text-align: center;"> </td>
</tr>
<tr>
<td>
<p>Max. Working Width</p>
</td>
<td style="text-align: center;">
<p>51"</p>
</td>
</tr>
<tr>
<td>
<p>Max. Working Height</p>
</td>
<td style="text-align: center;">
<p>8 1/4"</p>
</td>
</tr>
<tr>
<td>
<p>Total of Sanding Brush</p>
</td>
<td style="text-align: center;">
<p>4</p>
</td>
</tr>
<tr>
<td>
<p>Sanding Brush Angle </p>
</td>
<td style="text-align: center;">
<p>0 x 2, 15 x 2</p>
</td>
</tr>
<tr>
<td>
<p>Sanding Motor</p>
</td>
<td style="text-align: center;">
<p>3 HP x 4</p>
</td>
</tr>
<tr>
<td>
<p>Table Height Adjust Motor</p>
</td>
<td style="text-align: center;">
<p>1/2 HP</p>
</td>
</tr>
<tr>
<td>
<p>Brush Height Adjust Motor</p>
</td>
<td style="text-align: center;">
<p>1/2 HP</p>
</td>
</tr>
<tr>
<td>
<p>Brush Oscillating Motor</p>
</td>
<td style="text-align: center;">
<p>1/4 HP</p>
</td>
</tr>
<tr>
<td>
<p>Feed Motor</p>
</td>
<td style="text-align: center;">
<p>2 HP</p>
</td>
</tr>
<tr>
<td>
<p>Feed Speed</p>
</td>
<td style="text-align: center;">
<p>0 ~ 75 FPM</p>
</td>
</tr>
<tr>
<td>
<p>Sanding Brush Speed</p>
</td>
<td style="text-align: center;">
<p>600 ~ 1000 RPM</p>
</td>
</tr>
<tr>
<td>
<p>Sanding Brush Arbor</p>
</td>
<td style="text-align: center;">
<p>40 mm</p>
</td>
</tr>
<tr>
<td>
<p>Sanding Brush Diameter</p>
</td>
<td style="text-align: center;">
<p>12"</p>
</td>
</tr>
<tr>
<td>
<p>Machine Size (L x W x H)</p>
</td>
<td style="text-align: center;">
<p>122" x 74" x 77"</p>
</td>
</tr>
<tr>
<td>
<p>G.W.</p>
</td>
<td style="text-align: center;">
<p>10,900 LBS</p>
</td>
</tr>
<tr>
<td>
<p>N.W.</p>
</td>
<td style="text-align: center;">
<p>10,300 LBS</p>
</td>
</tr>
</tbody>
</table>
