New Machinery
Door Machinery, Floor Manufacturing Machinery, Cabinet Manufacturing Machinery, Stile and Rail Machinery, Stair Manufacturing
-
Biomass Briquette Systems Hydraulic Briquette Press BP-100 provides cost saving management of waste material by reducing the volume of waste to be handled. Please go to BIOMASS BRIQUETTE SYSTEMS for more details.
-
Biomass Briquette Systems BP‐250 is a single 2” diameter hydraulic briquette press. The BP‐250 comes complete as shown in the picture above, with the main control panel and cooling fan. A PLC controls the operation of the machine, starting with the speed and timing of the feed augers.
-
Biomass Briquette Systems BP‐400 is a single 3” diameter hydraulic briquette press. The BP‐400 comes complete as shown in the picture above, with the main control panel and cooling fan. A PLC controls the operation of the machine, starting with the speed and timing of the feed augers.
-
Biomass Briquette Systems BP‐500 is a dual 2” diameter hydraulic briquette press. The BP‐500 comes complete as shown in the adjacent picture, with the main control panel and cooling fan. A PLC controls the operation of the machine, starting with the speed and timing of the feed augers.
-
Biomass Briquette Systems BP‐800 is a dual 3” diameter hydraulic briquette press. The BP‐800 comes complete as shown in the picture above, with the main control panel and cooling fan. A PLC controls the operation of the machine, starting with the speed and timing of the feed augers.
-
The Castaly Assembly M/C Press PT-FA38 is one of several assembly presses offered in the Castaly line. Please view features and specifications of each to determine the model best to fit your needs.
-
Castaly 4' x 8' Cold Press PT-48CP is manufactured with heavy gauge sheet material frame.
-
The Castaly 4' x 8' Hydraulic Assembly Press AP-2513 is one of several assembly presses offered in the Castaly line. Please view features and specifications of each to determine the model best to fit your needs.
-
The Castaly 4' x 8' Hydraulic Press Table (1 Side) PT-48VA-1 is one of several assembly presses offered in the Castaly line. Please view features and specifications of each to determine the model best to fit your needs.
-
The Castaly 4' x 8' Hydraulic Press Table (2 Sides) PT-48VA-2 is one of several assembly presses offered in the Castaly line. Please view features and specifications of each to determine the model best to fit your needs.
-
The Castaly 5' x 10' Hydraulic Assembly Press AP-3017 is one of several assembly presses offered in the Castaly line. Please view features and specifications of each to determine the model best to fit your needs.
-
The Castaly 5' x 10' Cold Press PT-510CP is one of several cold presses offered in the Castaly line. Please view features and specifications of each to determine the model best to fit your needs.
-
The Dotul Angle Press AT-4808 is used for building stile & rail doors. Place the components in the press using the bottom left corner as a reference point. Both the top and right side of the press can be activated by using the valves in the front of the machine.
-
The Dotul Angle Press AT-4810 is used for building stile & rail doors. Place the components in the press using the bottom left corner as a reference point. Both the top and right side of the press can be activated by using the valves in the front of the machine.
-
The 5’ x 10’ horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail doors to be assembled from the inside out.
-
The 5’ x 8’ horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail doors to be assembled from the inside out.
-
The Dotul 10’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
-
The Dotul 10’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
-
The Dotul 8’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
-
The Dotul 8’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
- 1 of 2
- next ›
Used Machinery
-
#1039
Used Dotul Door Loader - Model DT-525
-
#1101
Used Dotul Dowel Machine - Model BR-25 - Being Sold "As Is"
