New Machinery

Door Machinery, Floor Manufacturing Machinery, Cabinet Manufacturing Machinery, Stile and Rail Machinery, Stair Manufacturing

Dotul Dust Collector-4 Bag DT-522

The Dotul DT-522 Dust Collector comes with an 8" opening and a 6" reducer. This dust collector works well with the Dotul Maverick and most vertical door machines.

Pictured with three 4" openings.
Dotul Angle Press - 8' AT-4808

The Dotul Angle Press AT-4808 is used for building stile & rail doors. Place the components in the press using the bottom left corner as a reference point. Both the top and right side of the press can be activated by using the valves in the front of the machine.
Dotul Assembly Table DT-536 & DT-548

The Dotul Assembly Table is used to pre-hang doors. It is built with heavy gauge steel and has sturdy indexing bars for accurate width control adjustment.
Dotul Computerized Door Edge Machine DT-650

The Dotul Computerized Door Edge Machine DT-650 machine is designed to machine for hardware preparation on all four edges of a door, one edge at a time.
Dotul Deep Lock Mortiser DT-523

The Dotul Deep Lock Mortiser can be used in-line with a Maverick, Nomad or other brand of vertical door machine. It can also be used free standing. The DT-523 does not use templates and will machine for a wide variety of mortise locks and extended faceplates.
Dotul Door & Hinge Jamb Machine DT-504

The Dotul Door & Hinge Jamb Machine – Model DT-504 machines for the hinge mortise on the door and jamb only, both interior and exterior doors and jambs.
Dotul Door & Panel Sizer DT-610

The Dotul Door & Panel Sizer, DT-610, sizes to length a door or panel, top & bottom using four blades that score and cut, producing a clean cut on both ends.
Dotul Door Stop Stitcher DT-521

The Model DT-521 Stop Stitcher will apply a mitered or butt jointed stop to the jamb using your choice of crown staples or finish nails. The DT-521 Stitcher is a front nailer, attaching the stop by shooting a crown staple or finish nail through the top of the stop into the jamb.
Dotul Face Frame Assembly Table MT-110

The Dotul Face Frame Assembly Table is a heavy duty assembly table that utilizes sliding arms that put downward pressure on the face frame joints.
Dotul Face Frame Cabinet Machine MT-108

The MT-108 Face Frame Cabinet Machine is perfect for defect cutting, parts are made easy, parts are clamped in place during cutting and both the left and right hand pocket drills will drill pocket holes during cutting. Each pocket drill can be operated individually.
Dotul Heavy Duty Door Unloader DT-540

The Dotul Heavy Duty Door Unloader DT-540 is used to offload doors from a vertical door machine on to an assembly table or door cart. The unloader eliminates the need for the operator to physically pick up the door, rotate the door and place it on an assembly table.
Dotul Horizontal Assembly Press - 10' AT-6120

The 5’ x 10’ horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail doors to be assembled from the inside out.
Dotul Horizontal Assembly Press - 8' AT-6097

The 5’ x 8’ horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail doors to be assembled from the inside out.
Dotul Maverick - Prehung Door Machine DT-500

The Dotul Maverick is a vertical door machine that has been designed and built by door machinery specialists with over 100 years of combined machinery, door and millwork experience.
Dotul NOMAD DT-400

Dotul is pleased to announce our newest door machine, the NOMAD. Designed to prehang factory or shop pre-beveled doors.
Dotul Stile Press - 10' Adjustable Platen - AT-1202

The Dotul 10’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
Dotul Stile Press - 10' Fixed Platen - AT-1200

The Dotul 10’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
Dotul Stile Press - 8' Adjustable Platen - AT-9602

The Dotul 8’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
Dotul Stile Press - 8' Fixed Platen - AT-9600

The Dotul 8’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.
Dotul Strike Jamb Router - Basic DT-503

The Dotul Strike Jamb Router model DT-503 is specifically used to machine interior jambs. This machine is typically used with the Maverick or Nomad door machines, but can also be used with other door machines.