New Machinery
Door Machinery, Floor Manufacturing Machinery, Cabinet Manufacturing Machinery, Stile and Rail Machinery, Stair Manufacturing
-
The Dotul DT-522 Dust Collector comes with an 8" opening and a 6" reducer. This dust collector works well with the Dotul Maverick and most vertical door machines.
Pictured with three 4" openings.
-
The Dotul Assembly Table is used to pre-hang doors. It is built with heavy gauge steel and has sturdy indexing bars for accurate width control adjustment.
-
The Dotul Computerized Door Edge Machine DT-650 machine is designed to machine for hardware preparation on all four edges of a door, one edge at a time.
-
The Dotul Deep Lock Mortiser can be used in-line with a Maverick, Nomad or other brand of vertical door machine. It can also be used free standing. The DT-523 does not use templates and will machine for a wide variety of mortise locks and extended faceplates.
-
The Dotul Door & Hinge Jamb Machine – Model DT-504 machines for the hinge mortise on the door and jamb only, both interior and exterior doors and jambs.
-
The Model DT-521 Stop Stitcher will apply a mitered or butt jointed stop to the jamb using your choice of crown staples or finish nails. The DT-521 Stitcher is a front nailer, attaching the stop by shooting a crown staple or finish nail through the top of the stop into the jamb.
-
The Flow Thru Stop Stitcher DT-520 is a high-speed door jamb stop stitcher. It will apply a butt joint stop or mitered stop to a flat jamb. The flat jamb is inserted into the machine first and then the doorstop is inserted on top of the flat jamb.
-
The Dotul Heavy Duty Door Unloader DT-540 is used to offload doors from a vertical door machine on to an assembly table or door cart. The unloader eliminates the need for the operator to physically pick up the door, rotate the door and place it on an assembly table.
-
The Dotul Maverick is a vertical door machine that has been designed and built by door machinery specialists with over 100 years of combined machinery, door and millwork experience.
-
Dotul is pleased to announce our newest door machine, the NOMAD. Designed to prehang factory or shop pre-beveled doors.
-
The Dotul Strike Jamb Router model DT-503 is specifically used to machine interior jambs. This machine is typically used with the Maverick or Nomad door machines, but can also be used with other door machines.
-
The Dotul Strike Jamb Router model DT-501 is specifically used to machine an interior or exterior jamb. It can machine a flat, rabbeted or split jamb. This machine is typically used with the Maverick or Nomad door machines, but can also be used with other door machines.
-
Using the DT-526 Vertical Door Loader & Off-Loader at the end of the machining functions on the door, allows for the door to be unloaded and loaded on a pallet or door cart.
-
Dotul Viking X-Y Door Lite Machine is capable of lite cutting, lock boring, latch boring and faceplate routing.
-
Last generation 14" Compound Double Mitre Saw fitted with one fixed head on the left and one movable head on the right. The movable head rides on precision ball bushings for the smoothness of movement. Positive stops for all the main angles are standard on both heads.
-
Last generation 14" Compound Double Mitre Saw fitted with one fixed head on the left and on movable head on the right. The movable head rides on precision ball bushing for the smoothness of movement. Positive stops for all the main angles are standard on both heads.
News & Announcements
Used Machinery
-
#1039
Used Dotul Door Loader - Model DT-525
-
#1101
Used Dotul Dowel Machine - Model BR-25 - Being Sold "As Is"
