Cantek 32" Planer P815HV

Cantek 32" Planer  P815HV

The Cantek P815HV 32″ Planer has a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing process.


  • PLC digital control for auto-thickness setting
  • Sectional infeed roller and sectional chip breaker
  • Anti-kickback safety fingers for safe operation
  • Variable speed drive for optimum finish results according to the planing depth and material being planed.
  • Quick-set table roll adjustment to aid in feeding difficult to feel material
  • Steel spiral cutterhead with carbide inserts – 6 rows 120 inserts 30 x 12 x 1.5 mmCutters mounted on angle for ‘shear’ cut
  • Exhaust hood with 6″ outlet
  • Flip open upper hood for easy and convenient access to change the knives on the cutterhead
  • Safety limit switch on the cover will not allow the operator to run the machine with the hood open.
  • 4 table raising jack screws




Maximum Planing Width


Maximum Planing Thickness


Minimum Planing Tthickness


Max. Depth of Cut


Minimum Length


Table Size

34 ¼” x 34 ¼”

Feed Speed

20-39 FPM Variable

Main Motor

20 HP

Feed Motor

2 HP

Power Rise and Fall of Table

½ HP

Dust Hood

(1) 6”

Shipping Weight

2450 lbs

Shipping Dimensions

66” x 44” x 53”

Product Code: 

Used Machinery