Cantek Drawer Notcher JEN-60

Downloadable Brochure: 
Cantek Drawer Notcher  JEN-60

The Cantek Drawer Notcher JEN-60 is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides.  The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching.  With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput.


  • Pneumatic cutter & drill stroke by foot pedal operation.
  • Cutter stroke and drill speed are adjustable for optimum finish results.
  • Drill will automatically position for both left and right drawer notches by activating a switch in the fence.
  • Machine will not cycle unless a drawer is up against the switch for safe operation.
  • Insert knife cutterhead with solid carbide inserts for optimum finish results and long tool life.
  • 2 ¼” (57mm) wide cutter allows for a wide range of undermount slides.
  • Comes with insert cutterhead with inserts and ¼” (6.3 mm) solid carbide drill bit.
  • Capable of notching up to 220 drawer boxes (both left and right) per hour.




Main Cutter Motor

3 HP

Notch Dimensions

2 ¼” (57mm) x 0.5” high

Cutter Diameter


Drill Diameter


Table Size

49” x 22”

Table Height from Floor


Dust Port

4” (670 CFM requirement)

Compressed Air Required

90 – 100 PSI

Machine Dimensions

48” x 37 ¾” x 39 ¾”

Machine Weight

506 lbs.

Product Code: 

Used Machinery