The CHB-271 Beaded Face Frame Notcher is designed to make cuts (notches) along the edge of the beaded face frame material. Easily cut a notch in the end of the moulding, in the center, or clip the chamfer with a special pop-up fixture. Equipped with a 1.25” horizontal spindle that moves up hydraulically past the table with the clamped material. A backup board in the table, climb cut and precision lineal ball bearings assure a clean cut, even on cross grain. Material air clamps and spindle motion are actuated by a foot switch. This machine may work in manual mode with the optional flip stops or could be easily synchronized with an automatic positioning system like TigerStop.
Features:
- Top Air Clamps - 3
- Front Air Clamps - 4
- Pneumatic Stop for Chamfering - 1
- Siko Counter for Depth Adjustment - 1
|
Specifications: |
|
|
Spindle Diameter |
1 ¼” |
|
Spindle Length |
2 ½” |
|
Cutter Diameter |
7” |
|
Max. Cutting Depth |
5/8” |
|
Max. Material Thickness |
1.20” |
|
Max. Material Width |
6” |
|
Main Motor |
3 HP |
|
Feed Speed: Air/Oil |
0-21 FPM |
|
Spindle Speed |
6200 RPM |
|
Dust Outlet |
4” |
|
Electrical |
230/460 V, 3 phase |
|
Machine Weight |
840 lbs. |
