The MX570P from Cantek is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of coil edge tape thicknesses between 0.4 mm & 3 mm and wood strips to 6 mm.
Features:
- Touch screen control for operator convenience.
- Motorized thickness adjustment.
- Equipped with line control for precise timing adjustment of working units.
- Workpiece is fed by chain conveyor.
- Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS.
- Automatic coil edge feeding with a thickness capacity of 0.4–3 mm; automatic strip feed magazine for solid wood edges up to 6 mm.
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- Teflon-coated hot-melt glue pot for PUR & EVA glues.
- Spring-loaded pressure unit with two (2) pressure rollers.
- Premilling function can remove up to 3 mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels. Two (2) counter rotating diamond cutterheads for optimum cut results.
- High frequency 12000 RPM end trimming unit, with Ø100 mm (4”) TC-Saw blades.
- Tiltable high frequency 12000 RPM top & bottom trimmers with insert knife cutters for flush, radius, & bevel trimming.
- High frequency corner rounding unit can process 0.4-3 mm thick edgebanding by tracing the shape of the panel.
- Radius scraper with 2 mm radius.
- 3000 RPM top & bottom buffing units.
- Heavy-duty pressure beam with extendable workpiece support.
- Heated infeed fence for pre-heating the panel for optimum glue penetration.
Specifications: |
|
Feeding Speed |
36 FPM / 11 M/min. |
Panel Thickness |
0.315” – 2.36” |
Coil Edge Thickness |
0.016” – 0.118” |
Max. Wood Strip Thickness |
0.236” |
Min. Panel Width |
4.72” |
Min. Panel Length (w/out corner rounding) |
6” |
Corner Rounding Min. Panel Length |
|
Height 8 – 30 mm |
8.66” |
Height 30 – 60 mm |
10” |
Working Table Height |
37.8” |
Extensible Support Width |
22 ¼” |
Dust Outlets Extension Connector |
5” x 3 |
Dust Collection CFM Requirement |
3200 CFM |
Compressed Air Requirement |
80 gallons/min. |
Electrical Requirement |
230/3/60 28 amps |