The MX370M from Cantek is designed to be a compact & durable entry level edgebander with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4 mm & 3 mm.
Features:
- 7” touch screen interface with user friendly controls.
- Workpiece is fed by rubber covered chain pads with idle pressure rollers on the top.
- Edge coil support plate: Ø 720 mm (28.3”).
- Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material up to 4 mm can be hand-fed.
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 1 liter capacity teflon-coated hot-melt glue pot.
- Spring-loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber).
- Pre-milling unit with (2) counter rotating diamond cutterheads for precise edge quality.
- Combination end trimming & corner rounding unit runs on precision linear bearings. One unit performs both functions. 2 mm radius.
- 10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming.
- Top & bottom trimmers use copy tracing wheels for optimum finishing results without scratching the face of the workpiece.
- Radius scraper with 2 mm radius.
- 2800 RPM top & bottom buffing units.
- Heavy-duty pressure beam with extendable workpiece support.
- Heated infeed fence for pre-heating the panel for optimum glue penetration.
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness.
Specifications: |
||
Feeding Speed |
23 FPM |
7 m/min. |
Panel Thickness |
0.472~1.77” |
12~45 mm |
Edge Thickness |
0.0158”~0.118” |
0.4 ~ 3 mm |
Minimum Panel Width |
3.54” |
90mm |
Minimum Panel Length |
6.7” |
170mm |
|
|
|
Min Panel Length w/ Corner Rounding |
||
With Panel Height 12-30mm |
6.7” |
170mm |
With Panel Height 30-45mm |
8.67” |
220mm |
|
|
|
Working Table Height |
33.7” |
856mm |
Extensible Support Width |
22” |
560mm |
Extraction Connection |
4” x 3 |
100mm x 3 |
Premilling Spindle Speed |
12000 RPM |
|
Top & Bottom Trimmer RPM |
10500 RPM |
|
End Trim/Corner Rounding RPM |
12000 RPM |
|
Buffing RPM |
2800 RPM |
|
Max. Machine Dimensions (LxWXH) |
130” x 47 ¼” x 47 ¼” |
|
Machine Weight |
1067 lbs |
485 kgs |
Shipping Dimensions (LxWxH) |
109” x 28 ½” x 54” |
|
Shipping Weight |
1507 lbs |
685 kgs |
Motor / Power: | ||
Feed Motor | 1 HP | 0.75 kW |
Premilling Motor | 2 HP | 1.5 kW |
Glue Spindle Motor | 1/3 HP | 0.25 kW |
End Trim/Corner Rounding Motor | ½ HP | 0.35 kW |
Top & Bottom Trimming Motor | ¾ HP | 0.55 kW |
Buffing Motors | 0.16 HP x 2 | 0.12 kW x 2 |
Heated Infeed Fence | ½ HP | 0.4 kW |
Total Connected Power | 8 HP | 5.47 kW |