DOTUL DOOR MACHINERY

The Dotul Face Frame Assembly Table is a heavy duty assembly table that utilizes sliding arms that put downward pressure on the face frame joints. Movable side clamps can be placed in position to g...

The Dotul 8? Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty ?I? beam construction and tube stock, welded securely for continuous and long duty. Thirt...

The Dotul Maverick is a vertical door machine that has been designed and built by door machinery specialists with over 100 years of combined machinery, door and millwork experience. The Maverick do...

Dotul is pleased to announce our newest door machine, the NOMAD. Designed to prehang factory or shop pre-beveled doors. The NOMAD is designed for versatility and flexibility. The NOMAD is designed...

Using the DT-526 Vertical Door Loader & Off-Loader at the end of the machining functions on the door, allows for the door to be unloaded and loaded on a pallet or door cart. With the flip of a swi...

The Dotul Heavy Duty Door Unloader DT-540 is used to offload doors from a vertical door machine on to an assembly table or door cart. The unloader eliminates the need for the operator to physically...

The Dotul Assembly Table is used to pre-hang doors. It is built with heavy gauge steel and has sturdy indexing bars for accurate width control adjustment. The Dotul Assembly Table allows the operat...

The Dotul Strike Jamb Router model DT-501 is specifically used to machine an interior or exterior jamb. It can machine a flat, rabbeted or split jamb. This machine is typically used with the Maveri...

The Dotul Strike Jamb Router model DT-503 is specifically used to machine interior jambs. This machine is typically used with the Maverick or Nomad door machines, but can also be used with other do...

The Model DT-521 Stop Stitcher will apply a mitered or butt jointed stop to the jamb using your choice of crown staples or finish nails. The DT-521 Stitcher is a front nailer, attaching the stop by...

The Dotul DT-522 Dust Collector comes with an 8" opening and a 6" reducer. This dust collector works well with the Dotul Maverick and most vertical door machines. Pictured with three 4" openings. F...

The Dotul 10? Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty ?I? beam construction and tube stock, welded securely for continuous and long duty. Thir...

The 5 x 8 horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail...

The 5? x 10? horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and r...

The Dotul Glue Spreader AT-300 includes a 4' infeed, 6' outfeed conveyorized glue spreader for easy gluing applicator setup. Features: 4' infeed, 6' outfeed conveyorized glue spreader for easy glu...

The Dotul Angle Press AT-4808 is used for building stile & rail doors. Place the components in the press using the bottom left corner as a reference point. Both the top and right side of the press ...

The Dotul AT-400 Dowel Driver is a free-standing single dowel insertion machine. The operator pre-glues the dowel hole, places the piece in front of the driver and presses on a foot pedal to insert...

The MT-104 Horizontal Door Stile & Rail Boring Machine is designed to drill dowel holes in any door stile up to 10 ft. in length all at the same time. The heads can then be turned inward to drill t...

The Dotul Long Bed Jointer has been specifically designed for running door stiles and rails. The longer bed offers greater stability and improves the quality of your finished product versus using a...

The Dotul Long Bed Jointer has been specifically designed for running door stiles and rails. The longer bed offers greater stability and improves the quality of your finished product versus using a...

The Dotul Straight Line Rip Saw MT-100 is a newly designed large table straight line rip saw. Several options are available for the processing of parts requiring a smooth edge for gluing without ad...

The MT series wide belt sanding machines are designed for the stile and rail door or cabinet industries. This machine is designed to prevent the standard rubber drums developing the wear marks or d...

The MT series wide belt sanding machines are designed for the stile and rail door or cabinet industries. This machine is designed to prevent the standard rubber drums developing the wear marks or d...

The MT series wide belt sanding machines are designed for the stile and rail door or cabinet industries. This machine is designed to prevent the standard rubber drums developing the wear marks or d...

The Dotul Raised Panel Door Shaper MT-200 machine can process and machine entry door stile and rail door parts as well as cabinet door parts. This machine allows one operator to machine profiles to...

The Louver Door Router MT-250 machine is designed to route stiles for fixed slat louver doors. It will also drill single holes for movable shutters, both left hand and right hand stiles when requir...

The Dotul Deep Lock Mortiser can be used in-line with a Maverick, Nomad or other brand of vertical door machine. It can also be used free standing. The DT-523 does not use templates and will machin...

The Dotul Glue Spreader w/ Hold Down Roller AT-200 is one option of glue spreader available through Dotul. Please see list of Features and Specifications to determine the best fit to meet your need...

The MT-108 Face Frame Cabinet Machine is perfect for defect cutting, parts are made easy, parts are clamped in place during cutting and both the left and right hand pocket drills will drill pocket ...

The Dotul Computerized Door Edge Machine DT-650 machine is designed to machine for hardware preparation on all four edges of a door, one edge at a time. It uses a configurable computer program to m...