my logo

Toll free USA & Canada

(877) 474-5521

User menu

Builders Automation Stair Wedge Cutter 2220

The Wedge Cutter is used to cut the wedges needed for manufacturing the stairs. It can be set to automatically cut 2 differently sized wedges which are then collected in different containers.


  • Automatically produces wood wedges used to lock stair treads and risers into slots in stair stringers.
  • Upright guide expandable to hold up to 40 pieces of wood at one time.
  • Rapid change over to cut glue blocks for more efficient operation.
  • Once cycle started, hands-free use for labor saving utilization.
  • Enables you to easily change size or angle without tools saving time and improving productivity.
  • Utilizes 1- ½ HP saw that automatically cuts pieces up to 9- ½"W by 11- ½"L.
  • Operator panel includes key start and e-stop controls for saw motor and start/stop control for pneumatic system that coordinates all machine motions.
  • Capable of producing wedges of varying thickness on alternate strokes of the saw.
  • Scrap material is ejected under the machine, and the wedges are discharged into user-supplied hoppers.
  • An included discharge chute diverter separates automatically and directs wedges of different thicknesses (produced on alternate saw strokes) into separate hoppers (user supplied).
  • Sawdust carried away from the saw guard pick-up through a 3" diameter hose.
  • Comes with manufacturer’s standard 1 year warranty.




Gross Weight

Approx. 480 pounds


Approx. 3’ x 4’ x 8’


Up to 900 wedges per hour

Air Requirements

110 PSI at 12 CFM (min. ¾” diameter unrestricted line)

Electrical Requirements

208/230V 3-phase at 12 amps

Product Code: