my logo

Toll free USA & Canada

(877) 474-5521

User menu

Dotul Door Machinery

    • Dotul Dowel Driver AT-400

    The Dotul AT-400 Dowel Driver is a free-standing single dowel insertion machine. The operator pre-glues the dowel hole, places the piece in front of the driver and presses on a foot pedal to insert the dowel. Dotul also offers machines that will make dowels.

    • Dotul Angle Press - 8' AT-4808

    The Dotul Angle Press AT-4808 is used for building stile & rail doors. Place the components in the press using the bottom left corner as a reference point. Both the top and right side of the press can be activated by using the valves in the front of the machine.

    • Dotul Chain Conveyor Glue Spreader AT-300

    The Dotul Glue Spreader AT-300 includes a 4' infeed, 6' outfeed conveyorized glue spreader for easy gluing applicator setup.

    • Dotul Horizontal Assembly Press - 10' AT-6120

    The 5’ x 10’ horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail doors to be assembled from the inside out.

    • Dotul Horizontal Assembly Press-8' AT-6097; Stile & Rail

    The 5’ x 8’ horizontal stile and rail door assembly press features a double hydraulic operation with a self-squaring device. Additionally, the machine has a center support to allow the stile and rail doors to be assembled from the inside out.

    • Dotul Stile Press-Fixed Platen-10' AT-1200

    The Dotul 10’ Fixed and Adjustable Platen Stile Presses are constructed from the ground up with a heavy duty “I” beam construction and tube stock, welded securely for continuous and long duty. Thirty thousand (30,000) lbs.

    • Dotul Dust Collector-4 Bag DT-522

    The Dotul DT-522 Dust Collector comes with an 8" opening and a 6" reducer. This dust collector works well with the Dotul Maverick and most vertical door machines.

    Pictured with three 4" openings.

    • Dotul Stop Stitcher DT-521

    The Model DT-521 Stop Stitcher will apply a mitered or butt jointed stop to the jamb using your choice of crown staples or finish nails. The DT-521 Stitcher is a front nailer, attaching the stop by shooting a crown staple or finish nail through the top of the stop into the jamb.

    • Dotul Strike Jamb Router - Basic DT-503

    The Dotul Strike Jamb Router model DT-503 is specifically used to machine interior jambs. This machine is typically used with the Maverick or Nomad door machines, but can also be used with other door machines.

    • Dotul Strike Jamb Router DT-501

    The Dotul Strike Jamb Router model DT-501 is specifically used to machine an interior or exterior jamb. It can machine a flat, rabbeted or split jamb. This machine is typically used with the Maverick or Nomad door machines, but can also be used with other door machines.

Pages

Subscribe to Dotul Door Machinery

Used Machinery